Инструкция KORTING KHА 7950 X Cube — страница 11

Инструкция

PDF

1,84 МБ

Климатическая техника

MilaTech93

Инструкция для KORTING KHА 7950 X Cube на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

- 12 -

ance switches on at speed level 1, If the cooker hood is

on depress the push-button for 2 sec. to switch off the

cooker hood. If the cooker hood is at speed level 1 it will

not be necessary to depress the push-button to switch

the cooker hood off. Decreases the motor speed.

Display C = indicates the motor speed level selected

and activates the timer.

Push-button D = switches on the cooker hood. In-

creases the motor speed. Touching the key at 3rd speed,

the intensive function runs for 10', then the appliance go

back to work at the original speed. During this function

the display blinks.

Key E = The Timer times the functions on activation for

15 minutes, after which they are switched off. The Timer

is deactivated by re-pressing Key E. When the Timer is

activated the decimal point must flash on the display.

The Timer cannot be activated if the intensive speed is

functioning.

The “clean air” function is activated by pressing key E

for 2 seconds when the appliance is switched off. This

switches the motor on for 10 minutes every hour at the

first speed. During functioning a rotary movement of the

peripheral segments must be visualised on the display.

When this time has passed the motor switches off and

the fixed letter “C” must be visualised on the display

until the motor re-starts after 50 minutes for another 10

minutes and so on. Press any key apart from the light

keys to return to normal functioning. Press key E to

deactivate the function.

• Active carbon/grease filter saturation:

- When display item C flashes, at a speed where it

alternates with the letter F (e.g. 1 and F), the grease

filters must be washed.

- When display item C flashes, at a speed where it

alternates with the letter A (e.g. 1 and A), the carbon

filters must be replaced.

After the clean filter has been positioned correctly, the

electronic memory must be reset by pressing button A

for approximately 5 seconds, until the indication F or A

shown on the display C stops flashing.

• COMMANDS: ELECTRONIC (Fig.22A):

A = LIGHT

B = OFF/SPEED I

C = SPEED II

D = SPEED III

E = AUTOMATIC STOP TIMER – 15 minutes (*)

F = FILTER SATURATION RESET LIGHT

When the “filter saturation” light flashes, the anti-grease

filters must be washed. When the light comes on without

flashing, the anti-grease filters must be washed and the

carbon filters replaced (in case of operation whit the re-

cycling version). When this operation has been com-

pleted, press the key to reset it.

• COMMANDS:

(Fig.23) LUMINOUS - (Fig.22B) ELECTRONICthe key

symbols are explained below:

A = LIGHT

B = OFF

C = SPEED I

D = SPEED II

E = SPEED III

F = AUTOMATIC STOP TIMER - 15 minutes (*)

• If your appliance does not have the INTENSIVE speed

function, press key E for two seconds and it will be

activated for 10 minutes after which it will return to the

previously set speed. When the function is active the LED

flashes. To interrupt it before the 10 minutes have expired

press key E again.

• By pressing key F for two seconds (with the hood

switched off) the “clean air” function is activated. This

function switches the appliance on for ten minutes every

hour at the first speed. As soon as this function is acti-

vated the motor starts up at the first speed for ten

minutes, During this time key F and key C must flash at

the same time.

After ten minutes the motor switches off and the LED of

key F remains switched on with a fixed light until the

motor starts up again at the first speed after fifty min-

utes and keys F and C start to flash again for ten min-

utes and so on.

By pressing any key for the exclusion of the hood light

the hood will return immediately to its normal functioning

(e.g. if key D is pressed the “clean air” function is deac-

tivated and the motor moves to the 2nd speed straight

away. By pressing key B the function is deactivated).

(*) The “automatic stop timer” delays stopping of the

hood, which will continue functioning for 15 minutes at

the operating speed set at the time this function is

activated.

• Active carbon/grease filter saturation:

- When button A flashes at a frequency of 2 seconds,

the grease filters must be cleaned.

- When button A flashes at a frequency of 0.5 seconds,

the carbon filters must be replaced.

After the clean filter has been replaced, the electronic

memory must be reset by pressing button A for

approximately 5 seconds, until the light on the button

stops flashing.

•COMMANDS:(Fig.24A)MECHANICAL_(Fig.24B) Elliptic

the key symbols are explained below:

A = LIGHT

B = OFF

C = SPEED I

D = SPEED II

E = SPEED III

G = MOTOR WORKING indicator

THE MANUFACTURER DECLINES ALL

RESPONSIBILITY FOR EVENTUAL DAMAGES

CAUSED BY BREACHING THE ABOVE WARNINGS.

Скачать «KORTING KHА 7950 X Cube» — 1,84 МБ СкачатьСкачиваний: 0

Инструкция KORTING KHА 7950 X Cube — страница 11

Другие руководства из этой категории