Инструкция KENWOOD KTC-D600E — страница 3

Инструкция

PDF

4,01 МБ

Автомультимедиа

SofiaLab16

Инструкция для KENWOOD KTC-D600E на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

English 3

Safety precautions

WARNING

To prevent injury or fire, take the following

precautions:

To prevent a short circuit, never put or leave any

metallic objects (such as coins or metal tools) inside

the unit.

Installation Procedure

To prevent short circuits, remove the key from the

ignition and disconnect the terminal of the

battery.

2 Make the proper input and output wire connections

for each unit.

3 Connect the wire on the wiring harness.

4 Connect the wiring harness connector to the unit.

5 Install the unit in your car.

6 Reconnect the terminal of the battery.

7 Press the reset button.

• Mountingandwiringthisproductrequiresskillsand

experience. For safety’s sake, leave the mounting and wiring

work to professionals.

• Makesuretogroundtheunittoanegative12VDCpower

supply.

• Donotinstalltheunitinaspotexposedtodirectsunlightor

excessive heat or humidity. Also avoid places with too much

dust or the possibility of water splashing.

• Donotuseyourownscrews.Useonlythescrewsprovided.If

you use the wrong screws, you could damage the unit.

• Makesurethatallwireconnectionsaresecurelymadeby

inserting jacks until they lock completely.

• Ifyourvehicle’signitiondoesnothaveanACCposition,or

if the ignition wire is connected to a power source with

constant voltage such as a battery wire, the power will not be

linked with the ignition (i.e., it will not turn on and off along

with the ignition). If you want to link the unit’s power with

the ignition, connect the ignition wire to a power source that

can be turned on and off with the ignition key.

• Useacommerciallyavailableconversionconnectorifthe

connector does not fit in the vehicle connector.

• Insulateunconnectedwireswithvinyltapeorothersimilar

material. To prevent a short circuit, do not remove the caps

on the ends of the unconnected wires or the terminals.

• Ifthefuseblows,firstmakesurethewiresaren’ttouchingto

cause a short circuit, then replace the old fuse with one with

the same rating.

• Aftertheunitisinstalled,checkwhetherthebrakelamps,

blinkers, wipers, etc. on the car are working properly.

To select TV Type (PAL or NTSC)

The TV picture display can be divided roughly into

two TV formats (PAL and NTSC). They are variable

depending on countries and areas. This unit has a

function for changing the video format according

to the TV type. Please confirm to set the Type switch

according to the type of your TV type.

NTSCPAL

Change NTSC/PAL setting only when the device is

turned off.

How to reset your unit

If the unit fails to operate properly, press the Reset

button.

It is used for the purpose of software update.

Reset button

Notes

1-KTC-D600E_ENG_1018.indd 3 2010-10-18 �� 1:48:48

Скачать «KENWOOD KTC-D600E» — 4,01 МБ СкачатьСкачиваний: 0

Инструкция KENWOOD KTC-D600E — страница 3

Другие руководства из этой категории