Инструкция по эксплуатации JVC KD-G737 — страница 14

ENGLISH

EXTERNAL DEVICES

Select a device you want to connect.

Use “OPEN’ or “SEARCH’ to connect.

To connect/disconnect a registered device

Select “BT-PHONE” or “BT-AUDIO.”

Select a registered device you want to connect/disconnect.

Select “CONNECT” or “DISCNNCT” to connect/

disconnect the selected device.

You can set the unit to connect a Bluetooth device automatically when the unit is turned on (See “AUTO CNT” on page 28.)

To delete a registered device

Select “BT-PHONE” or “BT-AUDIO.”

Select a registered device you want to delete.

Select “DELETE,” then “YES” to delete the selected device.

Use the Bluetooth device to search and connect.

On the device to be connected enter the same PIN code you have just entered for this unit “CONNECT”
flashes on the display.

Now connection is established and you can use the device through the unit.

The device remains registered even after you disconnect the device Use “CONNECT“ (or activate “AUTO CNT”) to connect the same device from next time (See the right column and page 28.)

To search for available devices

Perform steps 1 and 2 on page 14 then

Select “SEARCH.”

The unit searches and displays the list of the available devices.

- If no available device is detected “UNFOUND” appears.

Select a device you want to connect.

Enter the specific PIN code of the device to the unit.

- Refer to the instructions supplied with the device to check the PIN code.

Use the Bluetooth device to connect.

Now connection is established and you can use the device through the unit.

To connect a special device

Perform steps 1 and 2 on page 14 then

Select “SPECIAL.”

The unit displays the list of the preset devices.

EN14-21_KD-G737_001A_pre.indd 15

EN14-21_KD-G737_001A_pre.indd 15

12/14/06 2:56:54 PM

12/14/06 2:56:54 PM