Инструкция INVOLIGHT SLIMPAR784 — страница 4

Инструкция

PDF

0,13 МБ

Сценическое оборуд.

MaxPro9756

Инструкция для INVOLIGHT SLIMPAR784 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

to mortal electrical shock. Never modify, bend, strain mechanically, put pressure on, pull or heat up the

power cord. Never operate next to sources of heat or cold. Disregard can lead to power cord damages,

fire or mortal electrical shock.The cable insert or the female part in the device must never be strained.

There must always be sufficient cable to the device. Otherwise, the cable may be damaged which may

lead to mortal electrical shock. Make sure that the power-cord is never crimped or damaged by sharp

edges. Check the device and the power-cord from time to time.If extension cords are used, make sure

that the core diameter is sufficient for the required power consumption of the device. All warnings

concerning the power cords are also valid for possible extension cords.

Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the

power-cord by the plug. Never pull out the plug by tugging the power-cord. Otherwise, the cable or plug

can be damaged leading to mortal electrical shock. If the power plug or the power switch is not

accessible, the device must be the disconnected via the mains. If the power plug or the device is dusty,

the device must be take out of operation, disconnected and then be cleaned with a dry cloth, Dust can

reduce the insulation which may lead to mortal electrical shock. More severe dirt in and at the device

should only be removed by a specialist.

There must never enter any liquid into power outlets, extension cords or any holes in the housing of the

device. If you suppose that also a minimal amount of liquid may have exerted the device it must

immediately be disconnected. This is also valid, if the device was exposed to high humidity. Also if the

device is still running, the device must be checking by a specialist if the liquid has reduced any

insulation. Reduced insulation can cause mortal electrical shock. There must never be any objects

entering into the device. This is especially valid for metal parts. If any metal parts like staples or coarse

metal chips enter into the device, the device must be taken out of operation and disconnected

immediately. Malfunction or short-circuits caused by metal parts my cause mortal injuries. Never look

directly into the light source, as sensitive persons may suffer an epileptic shock (especially meant for

epileptics)Keep away children and amateurs. Never leave this device running unattended.

DESCRIPTION OF THE DEVICE

Features

> 7X8w Quad LED with RGBW colors

> Compact lightweight

> 6 or 4 DMX channels in optional

> Strobe effect with 1-10 flashes per second

> Programmable color-change speed and strobe effect

> DMX-controlled operation or stand-alone operation with Master/Slave function

> Sound-controlled via built-in microphone

> Addressing via control panel with 4 digit led display

> Remote controller in optional can easy control fixture with basic function and effect

INSTALLATION

Rigging

The installation of the projector has to be built and constructed in a way that it can hold 10 times the

weight for 1 hour without any harming deformation.

Скачать «INVOLIGHT SLIMPAR784» — 0,13 МБ СкачатьСкачиваний: 0

Инструкция INVOLIGHT SLIMPAR784 — страница 4

Другие руководства из этой категории