Инструкция INVOLIGHT MovingBeam410Q — страница 4

Инструкция

PDF

0,28 МБ

Сценическое оборуд.

АннаTech84

Инструкция для INVOLIGHT MovingBeam410Q на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

Press “UP” and “DOWN” to select the parameter. When choose “Speed”, press “SETUP” to

choose the speed menu of the auto running.

Press “UP” and “DOWN” to adjust the auto running speed from 01-20.

When choose “Freq.”, press “SETUP” to set the flash speed.

Press “UP” and “DOWN” to adjust the flash speed 00-20Hz

When choose “Color”, press the “SETUP” to set the parameter. Choose “Static” and press

“SETUP” again to enter color program. Press “UP” and “DOWN” to choose relative color.

When choose “Dimmer”, press the “SETUP” to set the parameter. When choose “RED”,

“GREEN”, “BLUE” or “WHITE”, press “SETUP” to enter relative gray level: 0-255. When

choose “Freq. ”, press “UP” and “DOWN” to set the flash speed 00-20Hz.

2) Pan function

When choose “Pan”, press “SETUP” enter the function choose menu.

Pan has 4 modes, p-Auto, p-Manul, p-CW and p-CCW.

When choose “p-Auto”, pan enters to build-in program.

When choose “p-Manul”, pan stops in setting location. Press “SETUP” enters to set pan

location. Press “UP” and “DOWN” to adjust the location: 0—540 degrees.

When choose "p-CW", Pan turns with clockwise direction (from the LED light). Press

“SETUP”, enter to set Pan speed setting. Press “UP” and “DOWN” to adjust the speed: 1-16.

When choose "p-CCW", Pan turns with anti-clockwise direction (from the LED light). Press

“SETUP”, enter to set Pan speed setting. Press “UP” and “DOWN” to adjust the speed: 1-16.

3) Tilt function

When choose “Tilt”, press “SETUP” enter the function choose menu.

Pan has 2 modes, t-Auto and p-Manul.

② When choose “t-Auto”, Tilt enters to build-in program.

When choose “t-Manul”, Tilt stops in setting location. Press “SETUP” enters to set tilt location.

Press “UP” and “DOWN” to adjust the location: 0—200 degrees.

2. Build-in program

When display shows ”SHOW”, it enter to the build-in program

Press “SETUP” to enter the build-in programs. There are 9 programs inside. Press “UP” and

“DOWN” to choose the built-in program from Show1 –Show9 (the built-in program is pre-set and

Скачать «INVOLIGHT MovingBeam410Q» — 0,28 МБ СкачатьСкачиваний: 0

Инструкция INVOLIGHT MovingBeam410Q — страница 4

Другие руководства из этой категории