Инструкция INVOLIGHT BL4650Z — страница 3

Инструкция

PDF

0,18 МБ

Сценическое оборуд.

OlegТех826

Инструкция для INVOLIGHT BL4650Z на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

3/3

l Keep pressing “Mode button”. When the display shows D001，press up/down button to set up the brightness

from 0 to 100. Remark： 0 is no light, 100 is the most bright.

B. DMX Mode：

l Press “Menu button”to the DMX mode.

l Press“Mode button”. When the display shows A001，press up/down button to set up the DMX address from

0 to 511. Remark: do not set up 512.

l Press“Mode button”. When the display shows CH01 or CH02, press up/down button to set up the Channel，

CH01 means 4xspot lamps are controlled by 1 way DMX signal to make the dim，CH02 means 4xspot

lamps are separately controlled by 2 way DMX signals to make the dim.

C. Master/Slave Linking Mode：

There must be 1pc in the Auto mode in all of the equipments, and the others set up to the DMX mode, And

all the DMX address must be set up to A001. Otherwise, the linking mode cannot be use.

4. Products instruction:

1． Open the carton and make sure that the cargo is in the good condition, if there is any broken or problem,

please contact the local distributor.

2． When you install the lamps, please cut off the power. Please do not touch the lamps or Light fixture when it

is light on.

3． Please keep the fixture in the ventilated place and take it away from the flammable and combustible

material.

4． Check the local power is same as the fixture.

5． Please be sure that you will cut off the power and cool the fixture before bulb replacement. When it is cool

down, please open the cover and replace the lamp. Also be sure to lock the cover after the replacement.

5. Caution:

l Please read this user manual before usage and follow up our struction for the operation.

l This fixture can be used under the temperature 40℃.

l Please must be cut off the power and cool down the fixture to replace the lamp bulbs.

l Please do not touch the light fixture when you switch on the power.

l Please contact the certificated engineer for the maintain and service.

l Please replace the lamp bulb and other accessories as per our standard.

l If the lamp burned or problem, please replace the lamp right away. Please hang it in the upside when you

install the fixture. Please be sure to get the certificated electrician to install the fixture. If there is no

electrician in the public, please do not use it.

l Please do not expose it in the damp, drops, or rain place and keep it away from the flammable and

combustible material.

l Please be sured it is earth linked.

Скачать «INVOLIGHT BL4650Z» — 0,18 МБ СкачатьСкачиваний: 0

Инструкция INVOLIGHT BL4650Z — страница 3

Другие руководства из этой категории