Инструкция INVOLIGHT BATBAR600W — страница 5

Инструкция

PDF

0,30 МБ

Сценическое оборуд.

МаксReader

Инструкция для INVOLIGHT BATBAR600W на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

D. IR Remote Description

Reminder: when using a remote control, please aim at the fixture to make sure the operation is flexible. But when it

is on M/S or DMX mode, the IR remote is not available.

1. ON / OFF

This is the ON / OFF function button.

2. AUTO

This is the auto running mode button.

3. PRG

This is the built-in programs mode button. Press “+”/ “-” to select “ ~ ”.

4. SOUND

This button is not available to this product.

5. SPEED

When it is on built-in programs, press this button enter into the speed value setting. Set the speed value

“ ~ ” by “+”/ “-”.

6. STROBE

When it is on built-in programs, press this button enter into the strobe value setting. If it is on strobe already,

then press STROBE to be off and vice versa. Set the strobe value “ ~ ” by “+”/ “-”.

7. Dimming

Press this button enter into the Color dimming mode. Press “R”“G”“B”“W” to set brightness value “0~255” of

each static color by “+”/ “-”. (This product LEDs are RGBW, so the “A” button is not available)

8. 0~9

On any mode, press number button to select a static color. The corresponding colors are as below:

Cyan

Purple

Purplish

Red

Orange

White

Bright

Pink

Light

Green

Water

Blue

Yellow

Warm

White

When it is not on the Color dimming mode, “R”“G”“B”“A”“W” refer to red, green, blue, amber and white static

colors respectively.

NOTE

1. Press “MODE” and “SETUP” buttons in the same time to restore the factory setting function and the data will

be initialized.

2. The fixture has temperature testing function, when there are problem with this function. In avoid to the fixture

have others problem, the fixture will enter into the protected status and will be turned off. When the display

flash “-rt” characters to prompt there is a temperature control fault and you need to repair it before operation.

3. Please operate the fixture base on the specification to avoid security incidents,

4. If ambient temperature is beyond the permitted range when you operate the fixture, such as, the temperature is

too high, the fixture will be damaged. Please reduce the using time of it.

5. If the fixture is used for a long time, you will find the battery will be not durable. It means the battery is over

use. Please take apart the back cover and use a new battery which is with the specifications with the old to

replace it.

Скачать «INVOLIGHT BATBAR600W» — 0,30 МБ СкачатьСкачиваний: 0

Инструкция INVOLIGHT BATBAR600W — страница 5

Другие руководства из этой категории