Добавить

Инструкция INVASION GS75R — страница 2

Инструкция ФорматPDF Размер0,26 МБ Страниц4 КатегорияЗвуковое оборудование ДобавилМаксЧитате

Инструкция для INVASION GS75R на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

← Назад
/ 4
Вперёд →
Features
1) Input: Connects the electric guitar.
2) Gain 1: Adjusts the amount of distortion in overdrive channel.
3) Gain 2 : Adjusts the amount of distortion in overdrive channel.
4) LED for Gainl : Indicates when Gainl channel is in use.
5) LED for Gain2 : Indicates when Gain2 channel is in use.
6) Contour: Adjusts the overall tone quality of Gain2 channel. Low Contour setting
emphasize middle frequency. A higher setting will notch the mid-range
to produce the crunch sound characteristic in most heavy metal sound.
7) Gain Switch : Selects Gainl or Gain2 channel in O.D. Channel.
8) Bass : Adjusts the amount of low frequency boost or cut as desired in O.D. channel.
9) Middle : Adjusts the amount of mid frequency boost or cut as desired in O.D. channel.
10) Treble : Adjusts the amount of high frequency boost or cut as desired in O.D. channel
11) Level: Controls the complete signal of the overdrive channel.
12) Channel Switch : Selects between clean and overdrive channel.
13) LED for Overdrive Channel: Indicates when O.D. channel is in use.
14) LED for Clean Channel: Indicates when clean channel is in use.
15) Level: Controls the complete signal of the clean channel.
16) Bass : Provides desired amount of bass response in clean channel.
17) Middle : Provides desired amount of middle frequency equalization in clean channel.
18) Treble : Provides desired amount of high frequency equalization in clean channel.
19) Reverb : Adjusts the reverberation effect.
20) Master: Controls the overall signal level of the guitar amplifier.
21) *Chorus Switch : Control the chorus function ON and OFF.
22) *Chorus LED : Indicates when chorus is ON.
23) *Depth : Adjusts the desired signal modulation.
24) *Rate : Produces a vibrato effect with Depth control turned up.
(19A) DFX MIX : Adjusts Wet/Dry Degree of the Signal
(21 A) DIGITAL EFFECTS BUTTON : Switches the Digital Effects On/Off
(23A) PROGRAM : Selects the Desired Effects
(24A) VARIATIONS(PARAMETER): Adjusts Parameter for the Selected Digital Effects
(25) Phones : Connects a stereo headphone.
(26) Power Switch : Turns the amplifier ON or OFF.
(27) AC Inlet: Connects AC power cord.
(28) Fuse Holder: Contains primary fuse.
(29) Ground-Lift: Remove ground from the circuit to eliminate excessive 60 cycle hum.
(30) External Speaker Jack : Connects the external speaker(s) with a minimum impedance
of 4ohm, and the internal speaker will be disconnected.
(31) External Speaker Jack : Connects the external speaker(s) with a minimum impedance
of 8ohm.
(32) Line Out: Connects a unit with line level input, e.g. Mixer.
(33) Footswitch Jack : Connects a footswitch to select clean/overdrive channel and
gain1/gain2 channel.
(34) Footswitch Jack : Connects a footswitch to switch reverb or chorus ON and OFF.
(35) Return Level: Controls the returning signal level.
(36) Return Jack : Connects the guitar amplifier to output of an effects unit.
(37) Send Level: Controls the sending signal level.
(38) Send Jack : Connects the guitar amplifier to input of an effects unit.
NOTE:
(19)/(21)/(23)/(24): for Non-DSP models
(19A)/(21 A)/(23A)/(24A): for DSP models
• Optional features, depends on purchased model.
Скачать «INVASION GS75R» — 0,26 МБ СкачатьСкачиваний: 0
Все руководства категории →
Нашли ошибку?