Инструкция GRILLO G Z3 — страница 9

Инструкция

PDF

3,33 МБ

Садовая техника

MaxUser800

Инструкция для GRILLO G Z3 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

G Z2-G Z3/ Translation of the original instructions

TECHNICAL SPECIFICATIONS

ENGINE:

- G Z2 > BRIGGS & STRATTON 575EX OHV 140cc 3HP one-cylinder petrol engine, silenced

muffler, Ready-Start device, air filter with paper cartridge.

- G Z3 > HONDA GCV160 160cc 4,4HP @3600 r.p.m., four stroke one-cylinder petrol engine.

STARTER: recoil starter.

FUEL TANK: 0,8 lt. (G Z2) – 0,9 lt. (G Z3)

TRANSMISSION: endless screw in oil bath

GEARBOX: 1 forward speed and 1 reverse speed

CLUTCH: forward gear through active coupling – reverse gear through belt

HANDLEBAR: height and side – adjustable

STANDARD ROTARY TILLER: (G Z2) 4 tines and side discs for a total width of 570 mm - (G Z3)

with 6 tines and side discs for a total width of 800 mm.

WORKING DEPTH: 280 mm

TINES DIAMETRE: 280 mm

ROTARY TILLER R.P.M.: forward gear155 r.p.m. - reverse gear 55 r.p.m.

SAFETY DEVICES: if the handlebar is released the machine stops – mudguards and handlebars

compliant with the current laws – muffler protection.

TRANSPORT WHEEL INCLUDED

WEIGHT: 41 kg (G Z2) – 45 kg (G Z3)

PUTTING THE MACHINE INTO SERVICE

- Check that the machine has not been damaged during transport.

- Fix the handlebar into the support using the two screws and pay attention not to tighten the

coupling too much. It must turn freely.

- Position the levers.

- Fix the spur on the frame (fig. 3 – fig. 4).

- Fix the frame on the gearbox (fig. 4).

- Insert engine oil (see engine notice)

- Fill the tank with fuel (fig. 1, no. 3).

INSTRUCTIONS FOR USE

BEFORE STARTING THE ENGINE

- check that the air filter is clean (fig. 5 – fig. 5A).

- check the engine oil level (fig. 6 – fig. 6A).

STARTING THE ENGINE

- Set the throttle lever in the FAST position (max.).

- Start the engine by pulling the recoil starter (fig.1 no.6).

- Once the engine is running bring the throttle lever back almost to the minimum..

STARTING WORK

- Adjust the height position of the handlebar to get the best working position using the knob (fig. 1

no.4)

- Adjust the working depth by lowering or raising the rear spur (fig. 3 suitable for soft grounds – fig.

4 suitable for hard grounds).

Скачать «GRILLO G Z3» — 3,33 МБ СкачатьСкачиваний: 0

Инструкция GRILLO G Z3 — страница 9

Другие руководства из этой категории