Инструкция GRILLO G Z1 — страница 8

Инструкция

PDF

3,28 МБ

Садовая техника

NikaLab432

Инструкция для GRILLO G Z1 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

GZ1/ Translation of the original instructions

TECHNICAL SPECIFICATIONS

ENGINE: BRIGGS & STRATTON 575EX OHV 140cc 3HP (Net power SAE J 1349) one-cylinder

petrol engine, silenced muffler, paper air filter

STARTER: recoil starter with Ready Start device

FUEL TANK: 0,8 Litres

GEARBOX: single speed

TRANSMISSION: endless screw in oil bath

CLUTCH: active coupling

HANDLEBAR: height and side – adjustable

STANDARD ROTARY TILLER: with 4 tines and side discs for a total width of 570 mm.

HOES DIAMETRE: 280 mm.

WORKING DEPTH: 280 mm.

ROTARY TILLER R.P.M.: 155 r.p.m.

SAFETY DEVICES: if the handlebar is released the machine stops; mudguards and handlebars

compliant with the current laws and muffler protection.

TRANSPORT WHEEL INCLUDED

WEIGHT: 35 kg

PUTTING THE MACHINE INTO SERVICE

- Check that the machine has not been damaged during transport.

- Remove the plate (fig. 2, A)

- Raise the handlebar and turn it through 90°.

- Gently press on the frame to mount it in working position. If necessary loosen the lower

screw (fig. 2A, D). Then insert and tighten the screws again (fig. 2A, C-D).

- Mount the spur on the frame (fig. 3 – fig. 3A).

- Fix the frame to the gearbox (fig. 4).

- Complete the handlebar rotation and put the controls back in vertical position. Add the

cable ties on the right side (fig. 4B).

- Fill in the engine oil (always refer to the engine manual)

- Fill the tank with fuel (fig.1 ref. 3).

INSTRUCTIONS FOR USE

BEFORE STARTING THE ENGINE

- check that the air filter is clean (fig. 5).

- check the engine oil level (fig. 6).

STARTING THE ENGINE

- Set the throttle lever in the FAST position (max.).

- Start the engine by pulling the pull-start handle (fig.1 no.6).

- Once the engine is running return the throttle lever almost to the minimum setting.

STARTING WORK

- Adjust the height and side position of the handlebar to get the best working position using the

knob (fig. 1 no.4)

- Adjust the working depth by lowering or raising the rear spur (fig. 3)

- Pull the transfer wheel support to the front and set it into a higher position (fig.8)

- Accelerate the engine (fig.1, no. 2)

- Press the forward lever (fig. 1, no.1): the machine starts working.

Скачать «GRILLO G Z1» — 3,28 МБ СкачатьСкачиваний: 0

Инструкция GRILLO G Z1 — страница 8

Другие руководства из этой категории