Инструкция GRILLO 11500 — страница 7

Инструкция

PDF

4,35 МБ

Садовая техника

LeoTech394

Инструкция для GRILLO 11500 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

11500/ Translation of the original instructions

24) Misshapen or damaged hoes must always be replaced and never repaired.

25) Always use original Grillo spare parts.

26) Before starting any work with the machine, check that all the accident prevention systems with

which it is equipped are in perfect working order. They must never be disabled or tampered with.

27) Before starting work, check that the nuts and bolts securing the tiller and hoes are perfectly tight.

28) All protective fittings (hoods, mudguards, etc.) must be kept in place during operation.

29) Never clean the tiller with the engine running.

30) Never use the machine barefoot.

31) Never change the engine settings, especially the maximum r.p.m.

32) Allow the engine to cool before placing the machine indoors.

33) CAUTION: to reduce the risk of fire, keep the engine, the exhaust pipe and the exhaust manifolds

free from grass, leaves, dust, etc…

34) If you have to empty the fuel tank, do this outdoors.

35) Rotavator must be driven by only one operator.

IDENTIFICATION AND AFTER-SALES SERVICE

The rotavator is fitted with a nameplate on the

frame with the serial number of the machine. This

number must be stated when requesting service or

ordering spare parts.

AFTER-SALES SERVICE

This handbook provides instructions for use of the motor hoe and for correct basic servicing which the

user can carry out himself. For all procedures not described in this handbook, contact your local dealer.

SPARE PARTS

Always use original spare parts, as they are the only ones to offer complete safety and

interchangeability. Always state the serial number of the machine and the code number or the part to be

replaced when ordering. For engine parts, refer to the specific handbook.

GUARANTEE

The guarantee is given in compliance with the current law. The dealer will have to give the client a copy

of the registration card of the machine, which they will print up from the Grillo website.

For the engine the guarantee of the relative manufacturers apply.

ORDERING SPARE PARTS

Always state the machine serial number and the code number of the part to be replaced.

Contact your local dealer. For further information, our address is:

GRILLO S.p.A.

Via Cervese 1701 - 47521 CESENA (FC) - ITALY

Tel. 0039 / 0547 / 633111 - Fax 0039 / 0547 / 632011

Web site: www.grillospa.it - E-mail: grillo@grillospa.it

THE FOLLOWING SPARE PARTS SHOULD ALWAYS BE KEPT TO HAND

– 1 gas cable

– 1 clutch cable

– 1 throttle lever

– 2 right tines with screws

– 2 left tines with screws

Скачать «GRILLO 11500» — 4,35 МБ СкачатьСкачиваний: 0

Инструкция GRILLO 11500 — страница 7

Другие руководства из этой категории