Инструкция по эксплуатации Flylink Full HD H.264 WIFI — страница 10

ФорматФормат: Руководство СтраницСтраниц: 17 КатегорияКатегория: Фитнес аксессуары ДобавилДобавил: OLD

Инструкция для Инструкция по эксплуатации Flylink Full HD H.264 WIFI на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

Назад
/ 17
Вперёд
Страница 10
Mode Switching When the camera is switched on the default mode is 1,080@30 frames/s and the LED indicator is in green To switch modes press the Mode key once Press the Power/Mode key to circulate modes in the following order: 720P60 Photo G-sensor mode Back and 1080P30.
1080p@30fps Mode Green LED
When the camera is switched on the default mode is 1080@30 fames/s In the preview mode press the Shutter button once again the camera will start to take videos In the process of videoing the green LED indicator will flicker; press the Shutter button again to stop then the green LED indicator will keep in solid green.
720P@60fps Mode Blue LED
Press the Shutter button once In the preview mode the camera will start to take videos In the process of videoing the blue LED
indicator will flicker; press the Shutter button again to stop then the blue LED indicator will keep in solid green Photo Mode Red LED
In 1080P30 mode press the MODE key to switch to Photo mode;
press the Shutter button to take photos with the red LED in solid green When the camera is in the standby mode to take single photo press the Shutter button then you will hear the sound from the buzzer and see the red LED indicator flickers once and thus one photo has been taken G-sensor mode Green LED and circular video In 1080P30fps mode press the MODE key to switch to G-sensor mode In such case G-sensor will not be inactivated until vehicle collision occurs and the current video segment will not be
Нашли ошибку?