Инструкция FELISATTI TP115/300 — страница 3

Инструкция

PDF

0,55 МБ

Инструменты / Контрольно-измерительные приборы

ИванPro216

Инструкция для FELISATTI TP115/300 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

1.1 STANDARD EQUIPMENT

TPF115/350VE-TPF115/350: Suction unit pipe union.

The series ttings may vary according to the model purchased

and the actual commercial situation.

1.2 ACCESSORIES AVAILABLE ON REQUEST

Abrasive paper, paper perforater, suction unit, suction unit kit

(only for models programmed for suction unit use).

1.3 SAFETY STANDARDS

The tool has been designed and constructed to permit

operation in all situations and in absolute safety. In particular

working conditions remember to use protective gloves and

safety goggles.

The tool has been designed and constructed to reduce noise

to minimum levels. (See technical data 1.1). In particular

working conditions the maximum sound level at the place of

work may exceed 85 dBA. In this case the operator must use

ear protectors. Work carefully and maintain the tool in perfect

working order, for your own safety.

GENERAL INFORMATION

1.0 THE AIM OF THIS MANUAL

This manual has been prepared by the Manufacturer as an

integral part of the mitre saw equipment.

The information contained is for the benet of professional

operators.

This manual denes the purpose for which the mitre saw

was designed, and contains all the information necessary

to ensure safe and correct use. We therefore recommend

reading the manual carefully before proceeding to any form

of adjustment, operation or maintenance. Constant respect

for the contents of this manual ensures both machine and

operator safety and the most economical and longest

working life of the machine itself. Photographs and drawings

have been supplied by the manufacturer for

exemplifying purposes; with the aim of following a policy

of constant development and product modernisation, the

MODEL TPF115/350 TPF115/350VE

Voltage and current V / A 230V-1,6A 230V-2,4A

Frequency Hz 50-60

Absorbed power W 300 350

Unloaded speed /min 10000 6500

Full-load speed /min 6000 6000

Oscillation unloaded /min 20000 13000

Orbit mm 2 4,5

Pad dimensions mm 115x210 115x210

Weight kg 2,9 2,9

Sound pressure emitted Lpa dB(A).(*) 75 70,4

Sound power emited Lwa dB(A).(*) 86 83,4

Vibration level m/sІ (*) mm 4,3 4,9

* Surveys carried out according to standards: EN60745.1 - EN60745.2.4

manufacturer is entitled to make modications without

forewarning.

1.1 TOOL IDENTIFICATION

The plate located on the left hand side of the tool identies the

model, the data plate located on the right hand side of the tool

contains the model references, the technical specications of

the motor and the constructor.

1.1.1 IDENTIFICATION

A Logotype plate

B Data plate

C Principal handgrip

D Switch

E Switch locking push-button

F Supplementary handgrip

G Base (Pad)

H Suction

I Abrasive paper xing clamp

1.2 MANUFACTURER – IDENTIFICATION

Interskol Power Tools S.L.

Carretera de Sant Joan de les Abadesses

s/n17500 RIPOL, (Girona), SPAIN

Tel +34972700200 - Fax +34972700554

E-mail: e-mail: felisatti@interskol.es

GENERAL SAFETY STANDARD

WARNING! Read all instructions. Failure to follow all

instructions listed below may result in electric shock,

re and/or serious injury.

The term “power tool” in all of the warnings listed below

refers to your mains operated (corded) power tool or battery

operated (cordless) power tool.

SAVE THESE INSTRUCTIONS

1) WORK AREA

a) Keep work area clean and well lit. Cluttered and dark areas

invite accidents.

b) Do not operate power tools in explosive atmospheres, such

TECHNICAL DATA

OPERATING INSTRUCTIONS FOR ORBITAL SANDER INTRODUCTION

All FELISATTI portable tools conform with standard EN60745, 98/37/EC machine directives and following modications, with

2006/95/EC, 93/68/EEC and, with regard to electromagnetic compatibility, the tools conform with directive EEC/89/336, and

with standards EN55014.1, EN 55014.2, EN 61000.3.2, EN 61000.3.3 and EN 50366.

The mark on the tool guarantees its conformity.

If used with the care and serviced regularly, this tool will provide long-lasting and reliable service. Carefully follow the

instructions contained in this manual, using them for reference for any eventual controls that may need to be carried out.

1.1 TECHNICAL DATA

Скачать «FELISATTI TP115/300» — 0,55 МБ СкачатьСкачиваний: 0

Инструкция FELISATTI TP115/300 — страница 3

Другие руководства из этой категории