Инструкция FELISATTI DC13/14, 4N2 — страница 3

Инструкция

PDF

0,80 МБ

Инструменты / Контрольно-измерительные приборы

МаксТех421

Инструкция для FELISATTI DC13/14, 4N2 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

MACHINE-SPECIFIC SAFETY WARNINGS

Hold power tool by insulated gripping surfaces, when

performing an operation where the cutting accessory may

contact hidden wiring. Cutting accessory contacting a “live”

wire may make exposed metal parts of the power tool

“live” and could give the operator an electric shock. Use

appropriate detectors to determine if utility lines are hidden in

the work area or call the local utility company for assistance.

Contact with electric lines can lead to re and electric shock.

Damaging a gas line can lead to explosion. Penetrating a

water line causes property damage or may cause an electric

shock.

Switch off the power tool immediately when the tool insert

jams. Be prepared for high reaction torque that can cause

kick-back. The tool insert jams when:

— the power tool is subject to overload

— it becomes wedged in the workpiece.

Hold the machine with a rm grip. High reaction torque can

briey occur while driving in and loosening screws.

Secure the workpiece. A workpiece clamped with clamping

devices or in a vice is held more secure than by hand.

Keep your workplace clean. Blends of mate rials are

particularly dangerous. Dust from light alloys can burn or

explode.

Always wait until the machine has come to a complete stop

before placing it down. The tool insert can jam and lead to

loss of control over the power tool.

Avoid unintentional switching on. Ensure the On/Off switch is

in the off position before inserting battery pack. Carrying the

power tool with your nger on the On/Off switch or inserting

the battery pack into power tools that have the switch on

invites accidents.

Do not open the battery. Danger of short-circuiting.

Protect the battery against heat, e. g., also against continuous

sun irradiation and re. There is danger of explosion.

In case of damage and improper use of the battery, vapours

may be emitted. Provide for fresh air and seek medical help

in case of complaints. The vapours can irritate the respiratory

system.

When the battery is defective, liquid can escape and come

into contact with adjacent components. Check any parts

concerned. Clean such parts or replace them, if required

Use the battery only in conjunction with your FELISATTI

power tool. This measure alone

protects the battery against dangerous over load.

Скачать «FELISATTI DC13/14, 4N2» — 0,80 МБ СкачатьСкачиваний: 0

Инструкция FELISATTI DC13/14, 4N2 — страница 3

Другие руководства из этой категории