Инструкция по эксплуатации ERISSON MW-117MI — страница 11

DANGER

Electric Shock Hazard Touching some of the internal components can cause serious personal injury or death Do not disassemble this appliance.

WARNING

Electric Shock Hazard Improper use of the grounding can result in electric shock Do not plug into an outlet until appliance is properly installed and grounded.

To Reduce the Risk of Injury to Persons Grounding Installation

CLEANING

Be sure to unplug the appliance from the power supply.
1 Clean the inside of the oven after using with a slightly damp cloth.
2 Clean the accessories in the usual way in soapy water.
3 The door frame and seal and neighbouring parts must be cleaned carefully with a damp cloth when they are dirty.

Two-round-pin plug

1 A short power-supply cord is provided to reduce the risks resulting from becoming entangled in or tripping over a longer cord.
2 If a long cord set or extension cord is used:
1)The marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance.
2)The extension cord must be a groundingtype 3-wire cord.
3)The long cord should be arranged so that it will not drape over the counter top or tabletop where it can be pulled on by children or tripped over unintentionally.

This appliance must be grounded In the event of an electrical short circuit grounding reduces the risk of electric shock by providing an escape wire for the electric current This appliance is equipped with a cord having a grounding wire with a grounding plug The plug must be plugged into an outlet that is properly installed and grounded.

Consult a qualified electrician or serviceman if the grounding instructions are not completely understood or if doubt exists as to whether the appliance is properly grounded If it is necessary to use an extension cord use only a 3-wire extension cord.

26.The microwave oven shall not be placed in a cabinet unless it has been tested in a cabinet

27 The appliances are not intended to be operated by means of an external timer or separate remote-control system.