Добавить

Инструкция ELENBERG WH11-20 — страница 12

Инструкция ФорматPDF Размер0,75 МБ Страниц13 КатегорияКлиматическая техника ДобавилOlegUser74

Инструкция для ELENBERG WH11-20 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

← Назад
/ 13
Вперёд →
12
INSTRUCTION OF REMOTE CONTROL KEY
• ON/OFF
Start-up key, press it, heater is running, now the key is “on”. When the
heater is working, the key is “off”.
• ADJUSTOR
When the heater is working, press “adjustor”, heating power is half pow-
er, full power or no power. You can cycle option.
• SWING
When heater is open, press “swing”, oscillation swing. Press again, oscil-
lation stop swing. Cycle option.
• TIME
Same as the timer of the panel
• “+” & “-”
During using, press “+” & “-” controlling temperature. When the room
temperature rises to the regulation temperature, heater will stop heat-
ing. When room temperature descend lower by 3 ℃ than regulation,
heating up again. Press “cancel”, temperature is out of control of the
regulation.
Regulate temperature by “+” & “-”. Start-up again, rst time press “+” &
“-”, the temperature start from 25℃ ( then change according to last reg-
ulation temperature), keeping between 49℃ and 10℃. Each press change
1℃. When press “+” & “-”, display temperature from the present room
temperature switch to regulation temperature. Stopping press key, re-
display the present room temperature.
1. There are eight indicator light switch, separately display room tempera-
ture and heater power, you can adjust them on your requirement.
2. Please make sure that the electrical-outlet must be equipped with in-
stalment of earth whose capacity should 250 V - 10 A. Do not exceed
250 V - 10 A. Make sure the socket and plug contact well.
3. Adjustor control heater panel natural wind /1000 W / 2000 W.
4. During using, if you feel the room temperature is too high /low and you
want lower/higher temperature, just adjust remote control panel “_” or
“+” key.
5. During using, press ‘+’ & ‘-‘ controlling temperature. When the room
temperature rises to the regulation temperature, heater will stop heat-
ing. When room temperature descend lower by 3 ℃ than regulation,
heating up again. Press “cancel”, temperature is out of control of the
regulation.
6. Timer sets the heater working hours. Half an hour, one hour, two hours
and four hours progression time.
USAGE
Скачать «ELENBERG WH11-20» — 0,75 МБ СкачатьСкачиваний: 0
Все руководства категории →
Нашли ошибку?