Инструкция DEWALT DW341K — страница 26

Инструкция

PDF

1,61 МБ

108

Инструменты / Контрольно-измерительные приборы

MaxЧитател

Инструкция для DEWALT DW341K на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

ENGLISH

Assembly and adjustment

Prior to assembly and adjustment

always unplug the tool.

Fitting and removing a saw blade (ﬁ g. B)

WARNING: The saw blade could be

hot due to the work process. So when

changing the saw blade make sure that

it is chilled cooled off or wear protetive

gloves when touching the blade.

The tool-free blade exchange system ensures

quick and easy changing of saw blades.

● Open the blade holder (7) by fully retracting the

blade latch (5).

● Insert the saw blade into the blade holder (7)

guiding the back of the blade into the groove of

the guide roller (8).

● Release the blade latch (5).

● To remove the saw blade, fully retract the blade

latch and pull the blade out of the holder.

Setting the bevel angle (ﬁ g. C)

The adjustable shoe (9) allows cutting of LH and

RH bevel angles up to 45°. The bevel scale has

preset positions at 0° and 45°.

● Slacken the screws (11) using the supplied Torx

wrench.

● Slide the shoe (9) toward the saw blade.

● Tilt the shoe and set the desired bevel angle

using the scale.

● Tighten the screws.

Setting the pendulum stroke (ﬁ g. A)

The adjustable pendulum stroke guarantees a

perfect cutting stroke for different materials.

● Slide the selector (10) to the desired position

referring to the table below. The selector can be

manipulated during operation.

Pos. Wood Metal Plastics

2 Fast cuts - PVC

2 Thick workpieces - Fibreglass

Acrylic

1 Plywood Aluminium -

Chipboard Non-ferrous -

0 Thin workpieces Sheet metal -

Fine cuts

Mounting the plastic anti-scratch shoe cover

(ﬁ g. D)

The anti-scratch shoe cover (12) reduces damage

to the surface of (sensitive) workpieces.

● Click the cover onto the shoe as shown.

Dust extraction (ﬁ g. E)

The dust extraction adaptor (13) in combination

with the dust extraction shroud (14) helps

extracting the dust from the workpiece surface,

when connected to a suitable dust extraction

system.

● Place the dust extraction shroud (14) between

the ﬁ nger guard (6) until it clicks in place.

● Fit the dust extraction adaptor (13) to the tool

as shown.

● Connect the hose of a suitable dust extraction

system to the adaptor.

When appropriate, connect a dust

extraction system designed in

compliance with the applicable

directives regarding dust emission.

Do not use a dust extraction system

without proper spark protection when

sawing metal.

Instructions for use

● Always observe the safety instructions

and applicable regulations.

● Make sure your workpiece is well secured.

Remove nails, screws and other

fasteners that may damage the blade.

● Check that there is sufﬁ cient space for

the blade underneath the workpiece.

Do not cut materials that exceed the

maximum cutting depth of the blade.

● Use sharp saw blades only. Damaged

or bent saw blades must be removed

immediately.

● Do not use the tool for sawing pipes or

tubes.

● Never run your tool without a saw blade.

● For optimal results, move the tool

smoothly and constantly over the

workpiece. Do not exert lateral pressure

on the saw blade.

Скачать «DEWALT DW341K» — 1,61 МБ СкачатьСкачиваний: 0

Инструкция DEWALT DW341K — страница 26

Другие руководства из этой категории