Инструкция DELONGHI Pind 30 — страница 6

Инструкция

PDF

4,70 МБ

Плиты / Духовки / Печи

LeoUser909

Инструкция для DELONGHI Pind 30 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

USE OF INDUCTION HOB

Notes:

– Each selection (by pressing one of

the keys) is indicated by an acoustic

signal (beep).

– User interface initial calibration: this

feature is for the keyboard calibration,

to adapt the sensibility of the keys to

the final mechanical, environmental

and user conditions.

Any time the cooktop is connected to

the electrical supply or after a power

failure (that generates a reset in the

user interface), the first time the Key-

Lock is touched the sensibility of

the keyboard is readjusted.

The first touch of the Key-Lock must be done

in certain condition: do not use gloves, use a clear

finger.

It is also important to consider that the calibration

process requires a low level of ambient light in the

area of the touch keys. If the environmental light

conditions are excessive (e.g. halogen hood light/s

on), the user interface calibration is suspended and

the cooking zones displays show “F ” and “L ” alter-

nating - error message “ FL ”) until the correct light

conditions will be recovered.

In this case the direct environmental light/s must be

switched off before calibrating the cooktop; then,

after completing the process, the light/s can be

switched on again.

– The touch control is switched off automatically (and

a warning beep sounds every 10 seconds):

• if one or more keys are touched for more than 10

seconds;

• if an object is positioned on the touch control

area;

• in the case of spillage of liquids on the control

keys.

– When the touch control reaches an ambient tem-

perature above a preset temperature the heating

elements are automatically switched off (the dis-

plays show “ F ” and “ ” alternating - error mes-

sage “ ”). In this case let the cooktop cool down

before using again.

Скачать «DELONGHI Pind 30» — 4,70 МБ СкачатьСкачиваний: 0

Инструкция DELONGHI Pind 30 — страница 6

Другие руководства из этой категории