Инструкция по эксплуатации Dell OptiPlex SX280 — страница 16

Quick Reference Guide www

When the boot device list appears highlight Onboard or USB CD-ROM and press

Select Onboard or USB CD-ROM Device from the CD boot menu.

Select the Boot from CD-ROM option from the menu that appears.

Type 1 to start the ResourceCD menu.

Type 2 to start the Dell Diagnostics.

Select Run the 32 Bit Dell Diagnostics from the numbered list If multiple versions are listed select the version appropriate for your computer.

When the Dell Diagnostics Main Menu appears select the test you want to run (see page 20).

Dell Diagnostics Main Menu

After the Dell Diagnostics loads and the Main Menu screen appears click the button for the option you want.

If a problem is encountered during a test a message appears with an error code and a description of the problem Write down the error code and problem description and follow the instructions on the screen If you cannot resolve the error condition contact Dell

NOTE:

The Service Tag for your computer is located at the top of each test screen If you contact Dell technical support will ask for your Service Tag.

If you run a test from the Custom Test or Symptom Tree option click the applicable tab described in the following table for more information.

Option

Function

Express Test

Performs a quick test of devices This test typically takes 10 to 20 minutes and requires no interaction on your part Run

Express Test first to increase the possibility of tracing the problem quickly.

Extended Test

Performs a thorough check of devices This test typically takes 1 hour or more and requires you to answer questions periodically.

Custom Test

Tests a specific device You can customize the tests you want to run.

Symptom Tree

Lists the most common symptoms encountered and allows you to select a test based on the symptom of the problem you are having.

Function

Results

Displays the results of the test and any error conditions encountered.

Errors

Displays error conditions encountered error codes and the problem description.