Инструкция по эксплуатации Dell OptiPlex GX280 — страница 17

Quick Reference Guide www

Memory modules are detected but a memory failure has occurred.

• If you have one memory module installed reinstall it and restart the computer For information on reinstalling memory modules see your online User’s Guide.

• If you have two or more memory modules installed remove the modules reinstall one module and then restart the computer If the computer starts normally reinstall an additional module Continue until you have identified a faulty module or reinstalled all modules without error.

• If available install properly working memory modules of the same type into your computer.

• If the problem persists contact Dell For information on contacting Dell see your online User’s Guide.

A possible expansion card failure has occurred.

• Determine if a conflict exists by removing a card (not the graphics card)
and then restarting the computer.

• If the problem persists reinstall the card that you removed remove a different card and then restart the computer.

• Repeat this process for each card If the computer starts normally troubleshoot the last card removed from the computer for resource conflicts (see "Resolving Software and Hardware Incompatibilities" on page 27).

• Move each card one at a time to a different PCI connector and restart the computer after each move.

• If the problem persists contact Dell For information on contacting Dell see your online User’s Guide.

Light Pattern

Problem Description

Suggested Resolution