Инструкция по эксплуатации Cybex MY.GO — страница 8

ФорматФормат: Руководство СтраницСтраниц: 39 КатегорияКатегория: Товары для детей ДобавилДобавил: OLD

Инструкция для Инструкция по эксплуатации Cybex MY.GO на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

Назад
/ 39
Вперёд
Страница 8
i Position the waist belt around your waist/hips fasten the buckle and adjust the length until it sits tightly Please ensure that the male part of the buckle is always fed through the elastic safety loop before fastening the buckle ia when closing the buckle of the waist belt keep pushing until you hear a loud “CliCk”.

PREPARAtIoN:

• make sure you read and fully understand the instructions before using the BaBY CaRRieR.

• The BABY CARRIER has to be optimally adjusted to the baby ́s size before each use.

• The BaBY CaRRieR is for adult use only a damaged BaBY CaRRieR must noT be used!

• always check that all buckles loops straps buttons and clips are securely fastened and in perfect functioning condition; if this is not the case or when in doubt do noT use the carrier.

• Always make sure that there is sufficient space around the head to ensure proper air flow.

• Do not dress your baby too warmly and check regularly to ensure that a comfortable temperature is maintained.

• never unbuckle the waist belt while the baby is in the carrier.

ii Height adjustment: The waist belt also functions as a height adjustment system (a) To carry smaller children the belt should be placed around the waist allowing the child to sit in an elevated position

(b) for larger children the belt should be placed around the hips The child is sitting at the right height when the adult can kiss the child ́s head; the child’s position should be adjusted accordingly.

iii Connector belt: (a) for ease of use the connector belt on the shoulder straps can be adjusted both in length and height (b) it can be fastened across the chest or across the top of the back.

iV width adjustment: Tighten the shoulder straps until they are comfortable for yourself and your baby

By changing the width you alsoadjustthesupporttoyourchild’sback Tuck the excess lengths of belt in the storage loops.

PleaSe enSURe YoUR CHilD’S BaCk iS SliGHTlY RoUnDeD wHile SiTTinG in THe CaRRieR anD Do noT THeRefoRe faSTen THe SHoUlDeR STRaPS Too TiGHTlY.

1 fasten the waist belt as described under “Preparation” Push the waist belt buckle around your back and pre adjust the length of the shoulder straps Sit down on a chair and spread the back section of the carrier across your lap Unfold the infant insert.

2 Position your child on the back section of the carrier The upper edge of the back section should meet the neck of your baby – if necessary use the head rest.

3 Similar to a nappy pull the infant insert up between your child’s legs which should be slightly tucked up.

4 Close the press studs and ensure that the child’s feet do not get caught in the waist belt.

FRoNT PoSiTioN FACiNg PARENT wiTh iNFANT iNSERT

(3.5 Kg – APPRox 6 Kg):

THe BUCkle mUST alwaYS Be feD THRoUGH THe elaSTiC SafeTY looP anD Be

PoSiTioneD on THe PaDDeD BaSe.

WARNING:
Нашли ошибку?