Инструкция CANDY CGM 61 X — страница 13

Инструкция

PDF

3,84 МБ

Климатическая техника

МаксТех777

Инструкция для CANDY CGM 61 X на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

- 13 -

•Anti-grease/activecharcoalfilterssaturation:

- When the A key flashes with a 2second frequency the anti-

grease filters must be washed.

- When the A key flashes with a 0.5second frequency the

active carbon filters must be replaced or washed depending

on the type of filter.

Once the clean filter has been put back one must reset the

electronic memory by pressing the A key for approximately

5seconds until it stops flashing.

•4.16Commands(Fig.11):

Push-buttonA= On/o lights switch.

Push-buttonB= On/o cooker hood switch. The appliance

switches on at speed level 1, If the cooker hood is on depress

the push-button for 2 sec. to switch o the cooker hood. If

the cooker hood is at speed level 1 it will not be necessary

to depress the push-button to switch the cooker hood o.

Decreases the motor speed.

DisplayC= Indicates the motor speed level selected and

activates the timer.

Push-buttonD= Switches on the cooker hood. Increases the

motor speed. Touching the key at 3rd speed, the intensive

function runs for 10’, then the appliance go back to work at

the original speed. During this function the display blinks.

KeyE= The Timer times the functions on activation for 15

minutes, after which they are switched o. The Timer is deac-

tivated by re-pressing KeyE. When the Timer is activated the

decimal point must ash on the display. The Timer cannot be

activated if the intensive speed is functioning.

The “cleanair” function is activated by pressing key E for 2

seconds when the appliance is switched o. This switches the

motor on for 10 minutes every hour at the rst speed. During

functioning a rotary movement of the peripheral segments

must be visualised on the display. When this time has passed

the motor switches o and the xed letter “C” must be visual-

ised on the display until the motor re-starts after 50 minutes

for another 10 minutes and so on. Press any key apart from

the light keys to return to normal functioning. Press key E to

deactivate the function.

•Activecarbon/greaseltersaturation:

- When display item C ashes, at a speed where it alternates

with the letter F (e.g. 1 and F), the grease lters must be

washed.

- When display item C ashes, at a speed where it alternates

with the letter A (e.g. 1 and A), the active carbon lters must

be replaced or washed depending on the type of lter.

After the clean filter has been positioned correctly, the

electronic memory must be reset by pressing button A for

approximately 5seconds, until the indication F or A shown

on the display C stops ashing.

4.21Mechanicalcontrols(Fig.12):the symbols are as follows:

A= LIGHT / ON-OFF key

B= OFF /FIRST SPEED key

C= SECOND SPEED key

D = THIRD SPEED key

If the hood is shut o at rst, second or third speed, when

it is turned back on, it will start at the same speed it was in

when switched o.

CUSTOMER ASSISTANCE SERVICE

Before contacting the Technical Assistance Service.

If the product does not operate at all, we advise you to:

- Check that the plug has been inserted into the power socket

correctly.

If you cannot identify the cause of the operating anomaly:

switch o the appliance (do not subject it to rough treatment)

and contact the Assistance Service.

PRODUCTSERIALNUMBER.WherecanIndit?

It is important that you inform the Assistance Service of your

product code and its serial number (a 16-character code which

begins with the number 3); this can be found on the guarantee

certicate or on the data plate located inside the appliance.

This will help to avoid wasted journeys being made by

technicians, thereby (and most signicantly) saving the cor-

responding callout charges.

THEMANUFACTURERDECLINESALLRESPONSIBILITY

FOR EVENTUAL DAMAGES CAUSED BY BREACHING THE

ABOVE WARNINGS.

Скачать «CANDY CGM 61 X» — 3,84 МБ СкачатьСкачиваний: 0

Инструкция CANDY CGM 61 X — страница 13

Другие руководства из этой категории