Инструкция по эксплуатации Binatone TWT-910 — страница 5

INSTRUCTIONS FOR USE

1 Place your waffle maker upon a dry smooth and plain horizontal surface.

2 Set cooking temperature to the lowest level by turning the temperature control selector (7) to OFF position You can choose a proper temperature for your waffle and get higher temperature by turning the control knob counterclockwise.

3 Then plug cord into an electrical outlet the operation indicator light (4) will turn on.

4 Always preheat the appliance for 5 minutes before baking.

When the unit has reached the proper temperature the temperature indicator light (5) will turn on.

5 When appliance is ready open it and oil the panels (6) with margarine or other cooking fat.

6 Turn some dough onto the lower baking plate with 2-3 cm edge distance.

Attention:

Do not fill too much dough The appliance can’t be locked.

7 Carefully lower the appliance lid pushing it lightly and fix the latch (3).

8 Your waffle will be ready in 2-3 minutes Open your waffle maker and gently take the waffle off using a wooden (or heatresisting plastic) spatula.

Attention:

To avoid damaging the non-stick coating never use metallic objects (fork knife) or any other sharp objects.

9 Use the cone maker (8) to roll over the waffle to create the cone shape Let it cool down for a bit before removing from the cone so it can keep the cone shape.

10.If your waffle is not brown enough change cooking temperature with the temperature control selector (7) Watch the appliance closely to avoid waffle burning.

11.To switch the waffle maker off just unplug it.

Warning:

After use always unplug the appliance.

MAINTENANCE

AND CLEANING

1 Always unplug and let your appliance cool down before cleaning.

2 Wipe the waffle maker case (1) with wet cloth Do not use the appliance until it dries out completely Do not use abrasive materials alcohol gasoline etc to clean the appliance.

3 Wipe the non-stick panels (6) with soft slightly wet cloth or sponge Do not clean panels with hard materials (metallic sponge abrasive materials etc.) or you will damage the surface.