Инструкция по эксплуатации Binatone JE-8200 — страница 3

ENGLISH

Disassembly

1 Make sure that the appliance is switched off and unplugged from electrical outlet.

2 Take the pusher (1)

(1)

(1)

(1)

(1) out of the feeder tube (2)

(2) Lift the safety clamps (7)

(7) and move aside and down.

3 Remove the lid (2)

(2) Then remove the grater/filter (3)

(3).

4 Unfasten the pulp container (4)

(4) Then the holder (6).

(6).

(6).

(6).

(6).

Operation

1 Assembly the appliance (See «Assembly») and plug it in Before plugging in make sure that the switch (10)

(10)

(10)

(10)

(10) is in «0»

«0» position and that the safety lock (7)

(7) is properly locked.

2 Wash the food before processing You may process the whole small-size fruits and vegetables (carrots small apples tomatoes) It is necessary to cut large-size fruits and vegetables into pieces of such a size that they freely pass into the feeder tube (2)

(2).

3 Switch on the juice extractor by selecting the required speed

«1» or «2»

«2»

«2»

«2»

«2» with the help of the switch (10)

(10)

(10)

(10)

(10) In order to operate the juice extractor efficiently use the first speed when extracting juice from soft food (for example tomatoes); and the second speed is recommended when processing hard food (such as carrots).

Note: run the juicer for 1 minute at a time only then switch it off for a while to get cooled.

4 Lower the fruits or vegetables into the feeder tube (2)

(2) carefully pushing them with the pusher; in so doing the motor should run Do not push the food into the juice extractor using excessive force This will merely reduce the appliance’s efficiency.

5 If in the course of operation the pulp container (4)

(4) becomes full switch off the juice extractor disassemble it and clean the container from pulp Assemble the appliance to continue operation.

6 After you finish immediately wash the juice extractor and thoroughly dry its parts.

CARE AND CLEANING

1 Unplug the juice extractor from the electrical outlet and disassemble it (see «Disassembly»).

2 Wipe the appliance body with soft damp cloth.

Never immerse the appliance body

Never immerse the appliance body

Never immerse the appliance body

Never immerse the appliance body

Never immerse the appliance body and power cord in water or any other and power cord in water or any other and power cord in water or any other and power cord in water or any other and power cord in water or any other l i q u i d l i q u i d l i q u i d l i q u i d l i q u i d

3 Wash the remaining parts of the juice extractor in soapy water with a soft sponge Do not use stiff brushes and abrasive cleaners The lid separating unit grater/filter pulp container are dishwasher-safe.

4 When extracting juice from such food as carrots etc the plastic parts of the juice extractor coming into contact with food may become stained To clean the stains wipe the parts with cloth moistened with a small amount of vinegar diluted by water –

two or three teaspoonfuls of 9% vinegar per a glass of water –

then wash the parts as usual.