Инструкция BINATONE JE 8000 — страница 7

Инструкция

PDF

1,83 МБ

Приготовление пищи

MilaMaster

Инструкция для BINATONE JE 8000 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

Note: Make sure that the bowl is put all the way into the

shaft of the base and fastened securely.

1. Assemble the rotating basket (5) and the strainers (4).

Then put it into the bowl (6).

Note: Make sure the white dot and the grey arrow are

aligned.

2. Place the squeezing screw (3) in the centre of the bowl

(6).

3. Assemble the feeder tube (2) onto the bowl (6). Then

turn clockwise until it locks.

Note: Make sure that the white dot on the feeder tube

(2) and the grey dot on the bowl (6) are aligned.

Disassembly

4. Make sure that the appliance is switched off and

unplugged from the electrical outlet.

5. Take the pusher (1) out of the feeder tube (2).

6. Twist the feeder tube (2) anticlockwise to unlock by

grabbing the two ejections and remove it from the body.

7. Remove the squeezing screw (3), strainer (4) and

rotating basket (5).

Operation

1. Assembly the appliance (See «Assembly») and plug it

in. Before plugging in make sure that the switch (12) is

in «0» position.

2. Wash the food before processing. You may process

whole small-size fruits and vegetables (carrots, grapes,

tomatoes). It is necessary to cut large-size fruits and

vegetables into pieces of such a size that they freely

pass into the feeder tube (2).

3. Switch on the juice extractor with the help of the switch

(12).

4. Lower the fruits or vegetables into the feeder tube (2),

carefully pushing them with the pusher (1); in so doing

the motor should run. Do not push the food into the

juice extractor using excessive force. This will merely

reduce the appliance's efciency.

5. If in the course of operation the strainer (4) becomes

full, switch off the juice extractor, assemble the

appliance, clean the strainer and then continue the

operation.

6. The slow juicer has a unique cleaning process when

switching between different avors of fruits. When you

are ready, simply pour water through the feeder tube

during the operation. This will rinse out most of the

residue and you are ready to keep juicing

Note: This is not an alternative to a complete cleaning

of each disassembled part.

Скачать «BINATONE JE 8000» — 1,83 МБ СкачатьСкачиваний: 0

Инструкция BINATONE JE 8000 — страница 7

Другие руководства из этой категории