Инструкция по эксплуатации Binatone BS-8026 — страница 3

Bath Electronic Scales BS 8026

Read this instruction carefully before the first use to become acquainted with operating your new appliance Please keep the instruction for further reference.

DESCRIPTION OF PARTS OF

THE APPLIANCE

1 Tray 2 Digital liquid crystal display 3 Battery compartment 4 1 lithium battery 3V type CR2032 5 Legs of the appliance 6 Weight unit switch (kilograms pounds).

BEFORE THE FIRST USE

Before the appliance is used for the first time remove all packing Open the battery compartment (3) on the platform (1) and remove the insulation to release contacts Move the weight unit switch (6) to select the desired units of measurement (Kg (kilograms) Lb (pounds).

USE OF THE

APPLIANCE

1 Set the scales on a flat hard horizontal surface Do not set the scales on carpets or other soft surfaces since it will affect accuracy of measurements.

2 To turn on the scales press the tray (1)

with your foot for a short time and wait for setting of «00.0» on the display (2).

The scales are ready for operation.

Note

: if you stand on the scales earlier the indication

«Err»

will appear If this happens start the procedure again.

3 Stand on the scales evenly distributing the weight on the tray (1) and do not move Wait till the appliance calculates the result.

4 Get off the tray and the scales will turn off automatically.

Note

: if after adjustment to zero on the display of the scales (2)

you did not put any load on the tray (1) the scales will turn off automatically within approximately six seconds.