Инструкция BENQ DC X710 — страница 8

Инструкция

PDF

3,15 МБ

Фото и видеокамеры / Фоторамки

ОлегLab373

Инструкция для BENQ DC X710 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

English

Preparing Your Camera for Use4

• The camera must be used with the specified charger set. Damage caused by the use of an

incorrect charger set is not covered under the warranty. Always make sure that the

camera is off before removing the battery.

• The battery may be warm after being charged or used. This is normal and not a

malfunction.

• When using the camera in cold environments, keep the camera and its battery warm by

holding it inside your jacket or other warm protective environment.

2.3 Inserting and Removing an SD Memory Card

The camera is equipped with internal memory, allowing you to record video clips, capture

images, or make voice files in the camera. You can also expand the memory capacity by using

an optional SD (Secure Digital) memory card to store more files.

1. Always make sure the camera is turned off

before inserting or removing a memory card.

2. Insert an SD memory card in the correct

direction, as shown in the illustration.

3. Close the battery/SD memory card cover.

To remove the SD memory card, make sure the

camera is turned off. Press lightly on the edge of

the memory card and it will eject.

• Be sure to format the SD memory card with this

camera before the initial use.

• To prevent valuable data from being accidentally

erased from an SD memory card, you can slide

the write-protect tab (on the side of the SD

memory card) to “LOCK”.

• To save, edit, or erase data on an SD memory

card, you must unlock the card.

• While formatting the internal memory, do not insert a memory card into the camera.

Otherwise, the memory card is formatted instead of the camera’s internal memory.

• Formatting is an irreversible action and data cannot be recovered at a later time. Back up

your data before formatting.

• An SD memory card having read or write problems may not be properly formatted.

2.4 Setting the Date and Time

Before using your camera for the first time, please set the date and time. For more

information, refer to the table in 3.4.1 “Setup Mode Menu” on page 20.

DC_X710_UM.book Page 4 Monday, September 25, 2006 3:06 PM

Скачать «BENQ DC X710» — 3,15 МБ СкачатьСкачиваний: 0

Инструкция BENQ DC X710 — страница 8

Другие руководства из этой категории