Инструкция ASV ASV-RF01(02) — страница 6

Инструкция

PDF

0,42 МБ

Видеорегистраторы

OlegBook36

Инструкция для ASV ASV-RF01(02) на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

The Bose

151

SE Environmental Speakers

English

Connect the speaker on the left side of the listening area to the left amplifier channel

(Figure 7). Attach the marked wire to the red (+) terminal. Attach the plain wire to the black

(–) terminal.

Connect the speaker on the right side of the listening area to the right amplifier channel.

Attach the marked wire to the red (+) terminal. Attach the plain wire to the black (–) terminal.

Note: If your speakers are being connected to your receiver or amplifier as a secondary set of

speakers, be sure to make the appropriate connections to the “B” channel.

Figure 7

Example of amplifier rear

panel connections

Testing the connections

Set the balance control on your receiver or amplifier to normal (centered) and play some deep

bass passages of music through the speakers. Verify that the sound seems to come from a

point between the two speakers, and that the bass is full and natural. If not, check your con-

nections again; they may be reversed, causing the speakers to play out of phase. Make sure

all the wires are connected positive to positive (+ to +) and negative to negative (– to –).

Troubleshooting

(+) wire

(–) wire

Problem What to do

Neither

speaker plays

1. Check the settings on your receiver/amplifier. Refer to its owner’s guide for instructions.

2. If your speakers are connected to the “B” output, check that the “B” output is selected.

Bass or treble

is weak

Check the tonal balance setting on your receiver or amplifier.

Only one

speaker plays

1. Make sure the balance control is centered on your receiver/amplifier.

2. Check the wires connected to the speaker that does not play. Make sure the wires are in good

condition and are firmly connected.

One speaker

still does not

play

1. Disconnect the working speaker from the receiver or amplifier.

2. Switch the cord of the faulty speaker from its original receiver or amplifier jacks to the other set of

jacks (the working speaker was originally attached to those jacks). If the speaker now works, the

problem is your receiver or amplifier. Reconnect the speakers to a working unit. If the speaker still

does not work, continue.

3. Remove the cord from the working speaker and connect it to the faulty speaker. If the speaker now

works, the original speaker cord is bad. If the speaker still does not work, the speaker is bad.

4. If trouble persists, contact your authorized Bose dealer, who will arrange for service. Or, contact

Bose Customer Service. Refer to the list of phone numbers and addresses included in the carton.

Скачать «ASV ASV-RF01(02)» — 0,42 МБ СкачатьСкачиваний: 0

Инструкция ASV ASV-RF01(02) — страница 6

Другие руководства из этой категории

ASV RF-GSM+