Инструкция ARCAM UDP411 — страница 12

Инструкция

PDF

7,72 МБ

107

Музыкальные центры / Hi-Fi / Hi-End / DVD / MP3

МилаLab861

Инструкция для ARCAM UDP411 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

E-19E-18

English

(e.g. BD, DVD, CD) will play automatically aer it has

loaded.

< On: Optical discs will play automatically.

< O: play must be pressed to play a disc.

CEC – e Consumer Electronics Control (CEC) option

is used to allow all supported devices connected by

HDMI to work together as a single system.

CEC may be turned ‘On’ or ‘O’, to link or unlink the

remotes.

Firmware Update – You can check for an upgrade to

your player’s rmware by selecting this menu item and

pressing OK to highlight ‘Network’, then press OK again.

A message appears if no new rmware is available,

otherwise follow the on-screen instructions. A message

tells you when the upgrade is complete. Press OK.

Load Defaults – Press OK with this item highlighted to

reset all settings to factory defaults (including parental

controls).

You are asked to conrm that you want to load the

factory default settings. For ‘No’ press OK; for ‘Yes’ press

then OK.

System Information – Highlight this option and press

OK twice to display system information.

e System Information panel shows information about

your player, such as the serial number and rmware

version.

BD-Live Storage – is last System option allows you

to review or delete BD-Live data stored on an external

USB drive.

e options are:

< Information: Highlight and press OK to show le

information on the BD-Live data.

< Erase data: Highlight and follow the on-screen

instruction to erase BD-Live storage data.

Security/Parental Control

Change Password – Sets or changes the 4-digit

password. Press the 0–9 buttons for the current password

(the initial password is 0000), then press OK.

Enter the new password to conrm, then press OK.

Parental Control – Parental control settings can be

used to prevent the viewing of material inappropriate

for children. According to the level set, a disc may be

stopped or have certain scenes cut or substituted with

alternative scenes, depending on the disc.

To set the parental control level:

1. Select ‘Settings’

‘Parental Control’

2. If Parental Control is set to ‘On’, enter your PIN

using the remote control numeric buttons. e

default PIN is 0000.

3. Once the Parental Control menu is accessed, press

the

cursor buttons and press OK

select an item.

Parental Control – Set whether Parental Control is ‘On’

or ‘O’.

< O: All discs are played back.

< On: Disc playback is restricted according to the

Parental Level set in the following menu item.

Parental Level – Set the degree of disc restriction. e

lower the value, the stricter the limitation.

1 Kid Safe: Suitable for children.

2 G: All children and general audience.

3 PG: Parental guidance suggested.

4 PG-13: Unsuitable for children under 13.

5 PG-R: Parental guidance recommended.

6 R: Restricted; cinemas require children under

the age of 17 to have an accompanying adult

parent or guardian.

7 NC-17: Cinemas do not admit anyone

younger than 17 years old.

8 Adult: Adult rating; discs of any rating

(Adult/General/Children) can be played back.

NOTE

< If the parental control level is set and you

try to play a disc with a level higher than the

current parental level, a password panel opens.

< If an attempt to change the parental control

or parental level is made, a password panel

opens.

Cinavia Notice

is product uses Cinavia technology to limit the

use of unauthorised copies of some commercially-

produced lm and videos and their soundtracks. When

a prohibited use of an unauthorised copy is detected, a

message will be displayed and playback or copying will

be interrupted.

More information about Cinavia technology is provided

at the Cinavia Online Consumer Information Centre

at http://www.cinavia.com. To request additional

information about Cinavia by mail, send a postcard with

your mailing address to:

Cinavia Consumer Information Centre,

P.O. Box 86851,

San Diego,

CA, 92138

USA

Problem Possible cause Remedy

No power < e AC input cord is disconnected.

< Poor connection at AC wall outlet or the outlet is inactive.

< Connect cord securely.

< Check the outlet using a lamp or another appliance.

No playback < e disc is loaded upside down.

< e disc is not playable.

< e disc is dirty.

< e recorded disc is not correctly nalized.

< e parental level is not set correctly.

< e symbol about invalid operation is displayed.

< Reload the disc with the printed side up.

< Use a playable disc.

< Clean the disc.

< Load a disc that is correctly nalized.

< Set the parental level setting correctly: see page E-18.

< Adjust the setting correctly.

Malfunction < e disc is scratched, dirty, poorly recorded or unplayable. < Press the POWER switch to switch the power o, press the

POWER switch again and then unload the disc.

No picture < e video cords are disconnected.

< e incorrect selection of input source on the TV.

< e disc is not playable.

< Connect the cords correctly.

< Select the input source correctly.

< Use a playable disc.

Noisy or distorted

picture

< e unit is connected to a recording device directly and the copyguard

function is activated.

< e disc is dirty.

< It is in rapid advance or reverse playback, or in frame advance playback.

< Connect the unit so that the picture signal is

< transferred directly to the TV.

< Clean the disc.

< Sometimes a small amount of picture distortion may

< appear. is is not a malfunction.

Abnormal picture or no

picture

< e resolution is not set correctly for video signals to be output from the

COMPONENT and the HDMI OUTs.

< e TV does not support HDCP.

< e TV System of this unit does not match either your TV or the disc.

< Set the resolution correctly: see page E-16.

< is unit will not transfer the video signals via the HDMI

connector to TV that does not support HDCP. is is not a

malfunction.

< Set the TV type correctly: see page E-16.

Slight pause of picture < A layer transition occurs during playback of DVD Videos, etc. in dual-

layer format.

< Sometimes a slight pause may occur. is is not a

malfunction.

No sound < e audio cords are disconnected.

< e speakers are disconnected to the amplier.

< e incorrect selection of input source on the amplier.

< Connect the cords correctly.

< Connect the speakers correctly.

< Select the input source correctly.

Noisy or distorted sound < e disc is dirty.

< Poor connections.

< Clean the disc.

< Check the connections and connect all cords securely.

BD-LIVE contents

cannot be loaded

< Poor connections between this unit and broadband router and/or

modem.

< e USB memory device is disconnected.

< e BD-Live Internet Access is set to ‘Prohibit Access’.

< e BD disc does not support BD-LIVE.

< e network settings are not set correctly.

< Check the connections and connect all cords securely.

< Connect the USB memory device to this unit.

< Set it to ‘Always Allow Access’: see page E-17.)

< Load a disc that supports BD-LIVE.

< Set the network settings correctly: see page E-17.

Remote control unit does

not operate.

< Batteries are not loaded or exhausted.

< e remote sensor is obstructed.

< Replace the batteries.

< Remove the obstacle.

trouble-

shooting

If a fault occurs, check this troubleshooting table before

taking your unit for repair.

If the fault persists, attempt to solve it by switching the

unit o and on again.

If this fails to resolve the situation, consult your dealer.

Under no circumstances should you repair the unit

yourself as this will invalidate the guarantee!

Скачать «ARCAM UDP411» — 7,72 МБ СкачатьСкачиваний: 0

Инструкция ARCAM UDP411 — страница 12

Другие руководства из этой категории