Добавить

Инструкция ARCAM P38 — страница 14

Инструкция ФорматPDF Размер0,68 МБ Страниц18 КатегорияМузыкальные центры / Hi-Fi / Hi-End / DVD / MP3 ДобавилAnnaЧитате

Инструкция для ARCAM P38 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

← Назад
/ 18
Вперёд →
E-14
P38
connections
,!!!!!S0DI2!!!!!Ñ
QPXFS!JOMFU
JO
M
S
WPMUBHF
TFMFDU
SFNPUF
JO
USJH
PVU
211.226W0331.351W
PVU
5!Ñ27!PINT
TQ2
TQ3
,!!!!!!M0DI3!!!!!Ñ
MJOL
,!!!!!M0DI3!!!!!Ñ
,!!!!!S0DI2!!!!!Ñ
BVEJP
Connecting to loudspeakers
e P38 amplier may be connected by simple wiring,
bi-wiring or bi-amping – see page 9 for details. In
addition, see the following section on the Mono Link
(and the diagram below) for another way of bi-amping
loudspeakers using a pair of P38s.
Other connections
e P38 amplier provides the following connections:
AUDIO IN
Connect the output sockets of your pre-amp. (or the
PRE OUT sockets of an integrated amplier, such as the
A38) to one of these inputs.
Mono Link
e P38 can be adapted to provide two mono
loudspeaker outputs from a single input. Using a pair of
P38s (i.e. one power amplier per loudspeaker) enables
you to bi-amplify a pair of compatible loudspeakers,
reducing the amount of cross-talk between channels
compared with using the P38 in a more conventional
stereo conguration.
1. Connect the
RIGHT channel from your pre-amp
(or PRE OUT R from an A38) to the socket labelled
AUDIO IN R on your rst P38.
2. Pull out the link supplied on the back panel
(labelled ‘link’), and use it to connect the le and
right
AUDIO OUT sockets together.
3. Repeat steps 1 and 2 on your second P38, but
this time connect the
LEFT channel from your
pre-amp (or PRE OUT L from an A38) to the socket
labelled AUDIO IN L.
4. Follow the diagram (le) for bi-wiring each
speaker, using the
SP2 connections of the P38
for the high-frequency speaker and the SP1
connections for the low-frequencies in each case.
Daisy chaining more ampliers
e P38 can be connected to further power ampliers
to drive more speakers (e.g., those in other rooms,
tri-amplied speakers, etc). is technique is called
‘Daisy chaining’.
Connect the
AUDIO OUT sockets on the P38 to the
pre-amp input of the next amplier in series, le to le,
right to right.
Note that daisy-chaining cannot be used if the Mono
Link (previously described) is in use.
s
Bsdbn!Q49
M
S
MS
Bsdbn!Q49
M
S
MS
Bsdbn!B49
M
S
QSFPVU
Npop!MjolNpop!Mjol
Using a pair of P38s with the Mono Link to bi-amplify a pair of speakers
Скачать «ARCAM P38» — 0,68 МБ СкачатьСкачиваний: 0
Все руководства категории →
Нашли ошибку?