Инструкция AL-KO 2000i — страница 26

Инструкция

PDF

8,44 МБ

188

Садовая техника

LeoBook386

Инструкция для AL-KO 2000i на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

Original instructions for use

Petrol Generator INVERTER 2000i

6. Remove engine cover ( 3/2)

7. Unscrewtheoilllinglidandstoreitinaclean

place. (

4/1)

8. Place an oil collection container under the engine.

9. Tilt the generator to fully drain the oil.

10. Place machine again on an even horizontal surface.

Observellingamountandoilgrade(seeoperat-

ing materials)

Important!

Donottiltthegeneratorwhilellingitwithoil-

Fillingbeyondthemaximumllinglevelcandam-

age the engine

11. Add new engine oil (

5),observemaximumlling

level (

 If engine oil has leaked out:

 Do not start the engine

 Absorb leaked engine oil using an oil binding

agent or cloth and dispose properly

 Clean the machine

12. Cleanandtightlyclosetheoilllinglid.

13. Insert and tighten engine cover

Do not dispose of waste oil:

 in domestic waste

 by pouring it into the canalisation, drain, or

onto the ground

Drop off waste oil in a closed container at a recycling

centre or a customer service centre.

Cleaning the fuel tank screen ( 18)

Important – Danger of explosion!

Donotsmokeandnonakedameswhen

handling petrol

1. Unscrew the fuel tank lid.

2. Remove the fuel tank screen

3. Clean the fuel tank screen using petrol

4. Rub fuel tank screen dry

5. Insert fuel tank screen

 If petrol has leaked out:

 Do not start the engine

 Avoid start attempts

 Clean the machine

 Haveenginecooldownbeforerellingwith

petrol to avoid spilling

 Spilled fuel can lead to damage to plastic parts.

Immediately wipe off fuel. Warranty does not

cover damage to plastic parts caused by fuel

6. Tightlyclosethetankllingopening

Changing the spark plug

1. Remove the cover from the housing ( 19/1)

2. Disconnect the spark plug connector (

19/2)

3. Attach the spark plug wrench (

20/4) through the

opening to the spark plugs

4. Insert bar (

20/3) through the spark plug wrench

(

20/4)

5. Unscrew spark plug by turning the spark plug

wrench

6. Insert new spark plug

Observe the spark plug type (see Technical data)

7. Tighten the spark plug using the spark plug wrench

Observe the torque! 20 Nm

8. Remove the spark plug wrench

9. Install the cover to the housing

Maintenance intervals

Before every use

 Check the engine oil level

 Inspecttheairlter

 Visual inspection for damage

After20operatinghoursor1monthafterrstuse

 Oil change

Every 100 operating hours or every 6 months

 Cleantheairlter

 Oil change

 Clean the spark plug

Every 300 operating hours, or once per year

 Replace the spark plug

Скачать «AL-KO 2000i» — 8,44 МБ СкачатьСкачиваний: 0

Инструкция AL-KO 2000i — страница 26

Другие руководства из этой категории