Инструкция ADA Robot 60 — страница 7

Инструкция

PDF

1,89 МБ

Инструменты / Контрольно-измерительные приборы

МаксТех557

Инструкция для ADA Robot 60 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

MEASUREMENT FOUNDATION

ROBOT 60

FUNCTIONS

Addition / Subtraction

Distance measuring.

Press button (3): next measurement is added to the previous one. Press button (3): next measurement is substracted from the previous one.

The result is displayed in the second line. Previous value is displayed in the previous line.

Area

Press the button (2) once.The symbol is displayed.

Press button to take the rst measurement (for example, length). Measured value is displayed in the second line.

Press button to take the second measurement (for example, width). Measured value is displayed in the second line. First measurement is displayed in

the rst line. The result of measured area is displayed in the main display area.

Addition / Subtraction of areas

Area measuring – see Area.

Press button (3) to enter into the Addition / Subtraction mode. Area value is displayed in the second line.

Press button (1) to take the rst measurement (for example, length).Press button (1) to take the second measurement (for example, width).

After the completion of area, press button (1), the result of substraction of areas is displayed in the main display area.

If the measurements are not nished, press button (3) to continue calculations.

Volume

For volume measurements, press button (2) twice until the indicator for volume measurement appears on the display.

Press button (1) to take the rst measurement (for example, length). Measured value is displayed in the second line.

Press button (1) to take the second measurement (for example, width). Measured value is displayed in the second line. First measurement is displayed

in the rst line.

Press button (1) to take the third measurement (for example, height). Measured value is displayed in the intermediate rst line.

The volume value will be displayed in the main display area and the previous area value is displayed in the rst line.

Скачать «ADA Robot 60» — 1,89 МБ СкачатьСкачиваний: 0

Инструкция ADA Robot 60 — страница 7

Другие руководства из этой категории