Добавить

Инструкция ADA Robot 60 А00240 — страница 8

Инструкция ФорматPDF Размер2,07 МБ Страниц36 КатегорияИнструменты / Контрольно-измерительные приборы ДобавилOlegMaster

Инструкция для ADA Robot 60 А00240 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

← Назад
/ 36
Вперёд →
MEASUREMENT FOUNDATION
8
ROBOT 60
Indirect measurement
Pythagorean measurement is used in the condition that the objective needing to be measured is covered or has no effective reecting
surface and can’t be measured directly.
Make sure you adhere to the prescribed sequence of measurement:
All target points must be in a horizontal or vertical plane.
The best results are achieved when the instrument is rotated about a xed point (e.g. with the positioning bracket fully folded out and the
instrument placed on a wall) or the instrument is mounted on a tripod.
The minimum / maximum function can be used. The minimum value must be used for measurements at right angles to the target; the
maximum distance for all other measurements.
Indirect measurement – determing a distance using 2 auxilary measurements.
E.g. When height and distance can’t be measured directly.
Press button (2) 3 times. The symbol is displayed. The distance to be measured is blinking in the symbol triangle.
Press button (2) to take distance measuring . The result is displayed in the rst line.
Press button (2) to take distance measuring.
After pressing button (2) the result is displayed in the rst line. The result of the function is displayed in the second line.
Indirect measurement – determing a distance using 3 measurements.
Press button (2) 4 times. The symbol is displayed. The distance to be measured is blinking in the symbol triangle.
Press button (1) to take distance measuring (side of the triangle) . The result of the function is displayed in the second line.
Press button (1) to take distance measuring (height of the triangle) . The result of the measurement is displayed in the rst line.
Press button (1) to take distance measuring (side of the triangle) . The result of the function is displayed in the second line.
The result of the measurement is displayed in the second line.
Скачать «ADA Robot 60 А00240» — 2,07 МБ СкачатьСкачиваний: 0
Все руководства категории →
Нашли ошибку?