Инструкция ACME BH20 — страница 7

Инструкция

PDF

0,62 МБ

Музыкальные центры / Hi-Fi / Hi-End / DVD / MP3

OlegBook43

Инструкция для ACME BH20 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

Pairing the headset with a Bluetooth cell phone

Prior to using the headset for the rst time, you have to pair it with a Bluetooth-enabled cell phone. The

pairing procedures are subject to dierent models of cell phones. Please refer to your cell phone user’s

manual for further information. The general pairing procedures are as follows:

1. Place the headset and Bluetooth cell phone where they are easily viewable, no more than 1 metre apart;

2. Enter the headset’s pairing mode (please refer to “How to enter pairing mode);

3. Activate your cell phone’s Bluetooth function and set your cell phone to search for Bluetooth devices

within range, and select “BH20” from the list of devices shown;

4. According to the indication, enter password or PIN No.: “0000”;

5. If prompted by your cell phone to connect, select “Yes” (this will vary among cell phone models);

6. After successful connecting, a blue LED ashes twice or three time every 4 seconds.

You should now be able to make and receive a call using the headset.

Remarks:

• If pairing has failed, please turn o the headset rst and then re-pair according to steps 1~6 mentioned

above.

• After pairing is successful, the headset and the cell phone will remember each other, they will no need

to re-pair next time. The headset can remember 8 paired devices. When the number of paired devices

exceeds 8, the rst one will be replaced.

• Every time the headset is turned on, it will connect to the last connected device automatically. If you want

to pair it with other devices, please turn o the Bluetooth function of the last connected devices rst and

pair the headset with the new device according to steps 1~6 mentioned above.

Re-connecting with a Bluetooth device

Automatic connecting

Every time the headset is turned on, it will connect to the last connected device automatically.

Скачать «ACME BH20» — 0,62 МБ СкачатьСкачиваний: 0

Инструкция ACME BH20 — страница 7

Другие руководства из этой категории